Service and Safety Check Schedule

Bodywork Exterior

Check condition and security of body panels
Check operation of door locks, catches and hinges and lubricate
Check condition and security of all trims, inserts and sealants
Check windows and seals for damage
Check condition and security of grab handles
Check security of body attachments (ladders, aerials, cycle racks etc)

Bodywork Interior

Damp meter test (see attached report)
Check floor for delamination
Check operation of cupboard hinges, catches, locks and stays
Check operation and condition of all window catches, stays and seals
Check operation and security of all skylights
Check operation of blinds and fly screens. Adjust if required
Check fixed ventilation openings for free flow of air

Water System and Appliances

Check operation and condition of water pump
Check operation of pressure switch and adjust if required
Check condition of water filter and housing (replace filter if required)
Check operation of taps and shower fittings (including external taps if fitted)
Check overall condition of fresh and waste water pipes and fittings
Check toilet for operation and condition of seal, blade and flush
Check drain plugs for seal and operation (drain down system in winter)

Gas Supply and Appliances

Fridge not serviced unless requested
Check regulator performance and carry out leak test
Check condition and date of flexible hose
Check condition and security of all pipe work
Check condition of LPG sticker on locker and security of gas bottles
Check gas dispersal holes for obstructions
Check fridge ignition, FFD and cooling
Check operation of cooker, hob and oven. Ignition, flame and FFD
Check operation of space heater. Ignition, flame, FFD and CO room test
Check operation of water heater. Ignition, flame, FFD and heating
Check operation and condition of external gas point if fitted

Electrical Systems 240v

Check condition of inlet plug and hook up cable (when available)
Operation of RCD, MCB’s and earth bonding
Check condition of wiring, sockets and fixed connections
Check operation of battery charger
Check mains operation of fridge
Check mains operation of cooker and hob
Check mains operation of water heater
Check mains operation of space heater

Electrical Systems 12v

Check condition of 12N and 12S plugs and cables
Check condition and operation of road lights and reflectors
Check condition of wiring, sockets and fuses
Check functions of 12S system (charging, fridge, lights etc)
Check operation of battery charger
Check condition of battery. Clean and lubricate terminals
Check operation of all 12v lights including awning light
Check blown air system

Fire and safety

Check condition of security, smoke and carbon monoxide alarms
Check condition, type and expiry date of fire extinguisher
Check condition and location of fire blanket
Check operation, function and safety of DIY additions

Chassis and Running Gear

Check coupling head and safety catch for wear and lubricate if required
Check and clean pads on ball acting stabiliser
Check condition and routing of breakaway cable and clip
Check operation of overrun piston and lubricate
Check operation of jockey wheel. Clean and lubricate
Check operation of handbrake and lubricate
Check brake rods, cables and supports
Remove wheels and check tyres for wear, damage, age and pressure
Remove brake drums; check bearings, seals and linings. Clean and lubricate
Replace drum with new split pin or one shot nut and torque as required
Adjust brakes at drum and check free play in the linkage and at handbrake
Replace road wheels and torque wheel nuts / bolts to manufacturers settings
Check condition and security of chassis and attachment to body
Check operation of suspension assemblies
Check corner steadies operation and lubricate
Check spare wheel carrier and folding step for operation and lubricate

A FULL WATER INGRESS REPORT IS INCLUDED WITH YOUR SERVICE